to be mounted on any type of fitted geared motor (PAM)

STADIO pre-stages

to be mounted on any type of fitted geared motor (PAM)

STADIO construction is modular and therefore it can be supplied as a separate unit to be mounted on any type of fitted geared motor (PAM). It is not requested any part premounting on the motor shaft. Like all connectable motive motors and gearboxes, STADIO is supplied by Motive with synthetic oil suitable for the whole lifetime. No maintenance requested. Like all connectable gearboxes and motors manufactured by Motive, the whole STADIO range can be mounted in any position with no need of specifications in the order. The pre-stage unit cannot be used by itself, but only coupled with another reduction unit. A powder paint coat cancels the negative effects of the aluminium porosity and protects the housing from oxidation. In order to increase silence, efficiency and duration, gears are made in case hardened (HRC59-63) tempered steel 20CrMnTi (UNI7846) accurately ground on the involute.

  motor flang
STADIO-63 63B5
STADIO-71 71B5
STADIO-80 80B5
STADIO-90 90B5

Download Area Manuals and Catalogs

Manuals

Download: STADIO pre-stages

Catalogs

Download: STADIO pre-stages Download: General Catalogue

3D animations
Our products
motors
IE2 or IE3, IP55, multiple voltage multi-frequency, S1 aluminum body
motors
IE2 or IE3, IP55, multiple voltage multi-frequency, S1 cast-iron frame
motors
selfbraking motors use one or 2 spring-pressure brakes
motors
for ambient temperatures up to 100°C, and S1 continuous duty
motors
ATEX certified motors for zones 1-2-21 and 22, Cat. 2 and 3, Dust and Gas
v.f.drives
patented system, easy to use, IP65, with removable control panel, remotable wireless
v.f.drives
variable speed drive, for 1PH supply and 3PH motors, up to 2.2kw
v.f.drives
control unit for air suction and ventilation
v.f.drives
compressors control unit
v.f.drives
control units for single phase and three phase hydraulic power packs
v.f.drives
VFD for the automatic control of water pumping systems
v.f.drives
island or hybrid drive for solar pumps and motors
v.f.drives
ATEX certified V.F.Drives for zones 21 and 22, Cat. 2 and 3, Dust
gearboxes
The gearbox model ROBUS-A completes ROBUS range
gearboxes
made in cast iron, with a capacity of up to 4300Nm
gearboxes
Monolithic iron body for heavy duty, bevel gears in the second stage, max 600Nm
gearboxes
for shaft mounting too. Monolitic iron body. Max 700Nm
gearboxes
made with die-casting aluminium housing from size 25 up to 90, and in cast iron from size 110
gearboxes
to be mounted on any type of fitted geared motor (PAM)
gearboxes
new planetary cone disc variators
gearboxes
ATEX certified gearboxes for zones 1-2-21 and 22, Cat. 2 and 3, Dust and Gas